Semi-automatic - GALAX
This type of printing machine has a high level of automation and low use of manual labour.
 
It is of compact construction, electrically and pneumatically operated, with PLC control.
 
The only task for the operator is to load (and eventually unload) the glass sheets. All other operations ( such
as transport of the sheets in the printing area ) are completely automatic.
 
PRINTING BASE
 
There are two kinds of printing bases :
 
  •  duralumin, anodized
  •  wood base, bi-laminated with plastic and covered with felt.
Both types of bases are equipped with a positioning system. The printing base is equipped with pre- and post-vacuum with air cushion to facilitate positioning, and the unloading of the glass sheets from the printing base.
 
FRAME SUPPORT PRINTING SQUARE
 
Built with double longitudinal bars, to avoid possible torsion of the frame ( in the case of large glasses ). It has micrometric adjustment for the positioning of the frame.
 

SQUEEGEE AND SCRAPER

 
The machine is equipped for mechanical micrometric adjustment of the squeegee and scraper.
 
There is a possibility to adjust the +/ - inclination in relation to the printing base, too.
 
The squeegee and scraper can be rapidly disassembled.
 
There is an automatic Lift-To-Mat.
 
The squeegee stops after the printing, leaving the silk without ink.
 
PRINTING SIZES
 
500 x 700 1000 x 2000
700 x 1000 1200 x 2200
1000 x 1400 ( or as per customer specification )
 
DOWNLOAD LEAFLET ABOUT THIS PRODUCT (PDF)